Verint Nextiva S1700e Series Guía de instalación descargar pdf (Pagina 30)

2: Configuration and Installation

20 Verint Video Solutions

Installation

When your device is successfully configured, it is ready to be installed in

its final location.

If your S1700e device is powered using PoE, you can use the two DC Pwr

poles on the back of the device to power a camera. The supply voltage of

the camera must be 12V DC +/- 10%; its maximum power consumption

must be 5W (417 mA).

To install the device:

1. Plug the video cable of the camera to the video input connector on

the device.

2. On a PoE device, power it and connect it to the network using the PoE

kit.

3. On a 12V DC device, power it with a power supply, then plug the

straight-through or crossover network cable to the LAN 10/100

connector.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 38 39

Sin comentarios

Verint Nextiva S1700e Series Guía de instalación Pagina 30