Verint Nextiva S1700e Series Guía de usuario Pagina 34
- Pagina / 111
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
3: Configuring and Installing the Device
18 Verint Video Solutions
Cable for Power, Video, and Serial
Data
The supplied CAB9P cable assembly is used for video, power, and serial port connection.
For the detailed pinout, see page 46.
Serial Port
The S1100w integrates one multipurpose serial port. This port is used for system
configuration and data communication: pan-tilt-zoom (PTZ), access control, or other. By
default, the port automatically detects if it is connected to an RS-232 or RS-422/485 serial
device.
The CAB9P cable is supplied with a female DB-9 plug enabling RS-232 connections.
However, most PTZ cameras, keyboards, and similar devices use RS-422/485 connections.
Therefore, you will have to adapt the CAB9P cable for its different uses:
During the configuration process of the S1100w, you need to access a computer, so the
DB-9 connector is required for RS-232 communication.
Later, when installing the device in its final location, you will likely want to connect it to
RS-422/485 equipment, therefore requiring changes on the cable. You should keep the
DB-9 connector on the cable for later use.
Warning: At any time there must be only one serial device connected to the S1100w
device. For instance, when configuring the device, you must unplug any
RS-422/485 device.
Power
Use the red and black wire pair of the CAB9P cable to connect the S1100w device to an
external power supply.
Mating connector
DB-9 connector
Terminal block Power wires BNC video connector
- Nextiva S1100w 1
- User Guide 3
- Verint Video Solutions iii 5
- Contents 7
- Verint Video Solutions vii 9
- Verint Video Solutions ix 11
- Who Should Read this Guide 12
- How to Use this Guide 12
- Related Nextiva Products 13
- About Us 13
- Warranty 14
- Verint Video Solutions xiii 15
- Overview 17
- About the S1100w 18
- Shipment 19
- Casing Description 20
- System and RF Planning 21
- Frequency Bands and Channels 22
- Wireless Cells 23
- System Planning 23
- Compatibility Issues 24
- S3100 3 S3100 2 25
- S1100w 2 25
- S1100w 1 25
- Colocated Cells 26
- Distance Limitations 27
- 5 GHz Band in Europe 28
- S3100 S3100 29
- RF Planning 30
- Antenna Requirements 31
- Interference 32
- RF Exposure Considerations 32
- Configuring and 33
- Installing the Device 33
- Serial Port 34
- Computer Requirements 35
- Setting Parameters 35
- Point-to-Point Connection 36
- Verint Video Solutions 21 37
- Installing the Transmitter 38
- Installing an Antenna 38
- RS-422/485 39
- Configuring the I/Os 41
- Updating the Firmware 43
- Performing a Hardware Reset 43
- Red/Blue Display 44
- Quality of Service 44
- Status LED 44
- Verint Video Solutions 29 45
- 30 Verint Video Solutions 46
- Setting Parameters with 47
- Getting Started 48
- Access Management 50
- User Accounts 51
- Security 51
- Network 52
- Wireless Communication 53
- Advanced Parameters 54
- Key Entry Format 55
- Tx Power Scale 55
- Sensitivity Threshold 55
- Minimum Margin 55
- Indoor/Outdoor RF Regulation 55
- System Status 56
- Advanced 56
- Load Default Configuration 57
- Reboot System 57
- 42 Verint Video Solutions 58
- Factory Default 59
- Configuration 59
- Cable Connections 61
- B: Cable Connections 62
- 46 Verint Video Solutions 62
- Here is its pinout: 64
- DHCP Support and 65
- C: DHCP Support and APIPA 66
- 50 Verint Video Solutions 66
- DTE and DCE 67
- Connections 67
- Verint Video Solutions 53 69
- 54 Verint Video Solutions 70
- CLI with Telnet 71
- E: CLI with Telnet 72
- 56 Verint Video Solutions 72
- Verint Video Solutions 57 73
- 58 Verint Video Solutions 74
- Surge Protection 75
- F: Surge Protection 76
- 60 Verint Video Solutions 76
- Channels 77
- Separation Between 77
- Devices Using Adjacent 77
- Verint Video Solutions 63 79
- 64 Verint Video Solutions 80
- 13 feet (4m): 81
- 13 feet (4m) 81
- 3.3 feet (1m) each 81
- 66 Verint Video Solutions 82
- Motion Track 83
- Motion Detection Processing 84
- Physical Connections 84
- Establishing a Connection 85
- H: Motion Track 86
- 70 Verint Video Solutions 86
- Configuring the DVMD Module 87
- Status Information 88
- Files Settings 89
- Display Settings 90
- Verint Video Solutions 75 91
- Sensitivity Settings 92
- Target Settings 93
- Target Size 94
- Technical Specifications 95
- 82 Verint Video Solutions 98
- Verint Video Solutions 83 99
- Glossary 100
- 84 Verint Video Solutions 100
- Verint Video Solutions 85 101
- Nextiva S1100w User Guide 101
- 86 Verint Video Solutions 102
- Numerics 103
- Compliance 107
- 92 Verint Video Solutions 108
- Declaration of Conformity 109
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Verint Nextiva S1700e Series
(74 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.051 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales