
H: Motion Track
68 Verint Video Solutions
Motion Detection Processing
Using adaptive signal processing technology, the DVMD module achieves a high probability
of detection in a wide range of operating environments, with a very low nuisance alarm
rate. This technology is especially good at handling noisy video sources, such as uncooled
infrared and light-intensified cameras.
DVMD adapts to changes in lighting and weather that have caused previous generations of
video motion detectors to generate a high level of nuisance alarms. Because DVMD works
with any NTSC or PAL camera, it greatly enhances the effectiveness of video-based security
systems operating in a wide range of indoor and outdoor environments.
The heart of the DVMD technology is the video processor, which executes the Radiant
proprietary algorithms.
All DVMD firmware, user settings, and masked areas are saved in the onboard flash
memory.
Physical Connections
To configure the DVMD module, the S1100w-MT device and the computer running the
ManagerNET application must be on the same IP network. Therefore, you must be able to
“ping” the device from the ManagerNET host computer.
The DVMD module is integrated in the enclosure of the S1100w-MT device.
Configuring the Dedicated Serial Port
To configure the DVMD module with the ManagerNET application, you must enable the IP
communication with a dedicated S1100w-MT serial port.
To configure the serial port of the device:
1. Start SConfigurator on the host computer.
2. Go in the Units tab, then click Discover.
S3100
Host computer
Embedded DVMD module
Comentarios a estos manuales