Verint Nextiva S1700e Series Guía de usuario descargar pdf (Pagina 23)

Nextiva S1700e Series User Guide

Verint Video Solutions 11

To work properly, devices on the same network must have

unique IP addresses. The device will not prevent you from

entering a duplicate address. However, its system status LED

will turn to flashing red; then the device will use an APIPA

address.

Next, you have to set the serial port parameters of the device.

To set the parameters of a device:

1. Ensure that the device has power and is connected to the

network.

2. Start SConfigurator.

The SConfigurator window appears.

3. In the General tab, click Program Options.

The Program Options window appears.

4. Check Detect All Units on LAN.

5. Ensure that the VSIP Port is 5510; otherwise, click

Default.

6. Ensure that the Discovery IP Address is

255.255.255.255; otherwise, click Reset to Broadcast.

7. Click OK.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 94 95

Sin comentarios

Verint Nextiva S1700e Series Guía de usuario Pagina 23