Verint Nextiva S1700e Series Guía de usuario descargar pdf (Pagina 27)

Nextiva S1700e Series User Guide

Verint Video Solutions 15

You should now have video on the monitor connected to the

receiver.

Installing the Device

When your device is successfully configured, it is ready to be

installed in its final location.

If your S1700e device is powered using PoE, you can use the

two DC Pwr poles on the back of the device to power a camera.

The supply voltage of the camera must be 12V DC +/- 10%; its

maximum power consumption must be 5W (417 mA). Use the

following sample values to estimate the maximum length of the

camera power cable:

To install the device:

1. Plug the video cable of the camera to the video input

connector on the device.

2. On a PoE device, power it and connect it to the network

using the PoE kit.

3. On a 12V DC device, power it with a power supply, then

plug the straight-through or crossover network cable to the

LAN 10/100 connector.

4. If required on a PoE device, connect the power wires of a

camera to the DC Pwr poles on the connector on the back

of the device.

Gauge Maximum length

16 AWG 300 feet (91.5 meters)

18 AWG 200 feet (61 meters)

22 AWG 80 feet (24 meters)

24 AWG 50 feet (15.25 meters)

+12VGnd

PoE kit

Gnd +12V

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 94 95

Sin comentarios

Verint Nextiva S1700e Series Guía de usuario Pagina 27