Verint Nextiva S1700e Series Manual de usuario descargar pdf (Pagina 37)

SConfigurator User Manual

Verint Video Solutions 25

 Starting Order—A sequence number, used during the

boot-up process of a master device in a DFS context, to

delay its startup. The purpose of this parameter is to

ensure that colocated master devices will not start at the

same time. The default starting order is 1. Every colocated

cell should have a different starting order: It should be

incremented by 1 in each system.

The starting order is available only in master devices and

has an impact only when the channel selection is

automatic.

 Antenna Gain—The gain of the antenna on the device (in

dBi). If you use an external antenna with your device, it is

important to enter its gain in SConfigurator. This way, the

device will be able to automatically change its transmission

power so that the total power (device and antenna) does

not exceed the maximum value established by your

country’s regulations.

 Transmission Power—The indication of the level of emitting

power of the device radio. The available values are:

 Maximum—The maximum allowed.

 50%—The power is reduced by 3 dB.

 25%—The power is reduced by 6 dB.

 12.5%—The power is reduced by 9 dB.

 Minimum—The power is set at 3 dBm.

By default, the transmission power of a device subject to

the TPC regulations is set to 50%.

 Maximum Distance—In SDCF mode, the maximum

transmission distance (between a master and slave S3100)

in all wireless cells present in the same geographical region

and sharing the same frequency channel. The two S3100

devices making up an SDCF wireless cell must have the

same value for this parameter.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 98 99

Sin comentarios

Verint Nextiva S1700e Series Manual de usuario Pagina 37