Verint Nextiva S1700e Series Manual de usuario descargar pdf (Pagina 82)

8: Aligning the Antenna

70 Verint Video Solutions

To align the external antenna:

1. In the General tab, click Antenna Alignment.

The Antenna Alignment Utility window appears.

2. On an S1100w device:

 Connect the device to a COM port of the host computer

using a serial cable.

 In the Connect using field, select the COM port, then

click Connect.

3. On a slave S3100:

 In the Connect using field, select Telnet, then click

Connect.

The Telnet Connection window appears.

 Enter the IP address of the slave device, then click OK.

4. Wait until the status becomes Connected.

5. Move the antenna so as to get the highest signal level

possible (that is, the closest to 0 dBm).

The needle in the Average Signal Level dial moves to

indicate the current radio signal (in dBm).

A red arc around the dial indicates the best values reached

so far.

The dial automatically adjusts its range in real time to

improve reading precision.

6. To recalibrate the dial and reset the minimum and

maximum values reached, click Reset.

7. To exit, click Done.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 98 99

Sin comentarios

Verint Nextiva S1700e Series Manual de usuario Pagina 82